-
4 Square box – 2-18 deep – drawn
Features • Drawn • 2-1/8″ deep offer extra cubic capacity • 29 cubic inches • Available in multiple KO sizes and raised ground emboss with installed 10/32 ground screw where noted Applications • 4″ square drawn junction boxes can be installed in walls or ceilings for lighting fixtures, switches, receptacles or other outlet devices • Square boxes are used to bring power to a number of electrical devices where multiple conductor runs are split in two or more directions Standard Mate... -
4 Square surface covers – grey powder coating – raised 1/2
Features • Includes hardware for mounting receptacles • Available in various cover designs • Crushed corners • Raised 5/8″ • 6.6 cubic inch Applications • 4″ square industrial surface covers allow for a quick installation of electrical devices to steel covers before they are mounted to the box • Raised 5/8″ to protect wires inside the box for switches, receptacles, and outlets Standard Material • Galvanized steel -
4 Square two device switch box – 2-18 deep – drawn
Features • Drawn • 2-1/8″ deep offer extra cubic capacity • 29 cubic inches • Available in multiple KO sizes and raised ground emboss with installed 10/32 ground screw where noted Applications • 4″ square drawn junction boxes can be installed in walls or ceilings for lighting fixtures, switches, receptacles or other outlet devices • Square boxes are used to bring power to a number of electrical devices where multiple conductor runs are split in two or more directions Standard Mate... -
4-11/16 Square combination – device and tile covers – single device
Features • Ideal for exposed work applications, providing an easy method for the installation of electrical devices • Can be used on any 4-11/16″ square box Applications • 4-11/16″ single gang device rings are used with 4-11/16″ square boxes to mount switches, receptacles and devices • Angled slots on the covers compensate for up to 12° of box misalignment on upright framing members • 4-11/16″ square covers are used to cover 4-11/16″ square box wiring and provide... -
Gang boxes – 1-5/8 deep – welded
Features • 1- 5/8″ deep • Welded • Available with 1/2″ and 3/4″ concentric KOs • Available in 2 thru 8 gang Applications • Use when more than two devices or outlets are required in one box • Multi-Gang Switch boxes can be installed in walls or ceilings for lighting fixtures, switches, receptacles or other outlet devices • Use to bring power to a number of electrical devices where multiple conductor runs are split in two or more directions Standard Material • Galvanized steel -
4-11/16 Square combination – device and tile covers – two device
Features • Ideal for exposed work applications, providing an easy method for the installation of electrical devices • Can be used on any 4-11/16″ square box Applications • 4-11/16″ double gang device rings are used with 4-11/16″ square boxes to mount switches, receptacles and devices • Angled slots compensate for up to 12° of box misalignment on upright framing members • Four slots for mounting vertically or horizontally Standard Material • Galvanized steel -
Gang boxes – 2-1/2 deep – welded
Features • 2- 1/2″ deep • Welded • Available with 1/2″ and 3/4″ concentric KOs • Available in 2 thru 6 gang Applications • Use when more than two devices or outlets are required in one box • Multi-Gang Switch boxes can be installed in walls or ceilings for lighting fixtures, switches, receptacles or other outlet devices • Use to bring power to a number of electrical devices where multiple conductor runs are split in two or more directions Standard Material • Galvanized steel -
Masonry boxes – 2-1/2 deep
Features • Welded • 2- 1/2″ deep • Concentric KOs • 6/32 Tab holes for mounting devices • Available in 1 thru 5 gang Applications • Solid, 2-1/2″ deep, multi-gang masonry boxes are used for mounting switches, plugs, outlets and other electronic and electrical devices in masonry, brick and 4″ block walls. • Extra deep design allows for deep devices, numerous wires, switches and other electronic and electrical devices. Standard Material • Galvanized steel -
Concrete rings and covers
Applications • Knockouts are sealed against box surface to prevent wet concrete and water from entering the box. The top covers are removable allowing any before-pour work Standard Material • Galvanized Steel -
Masonry boxes – 3-1/2 deep
Features • Welded • 3- 1/2″ deep • concentric KOs • 6/32 Tab holes for mounting devices • Available in 1 thru 6 gang Applications • Solid, multi-gang masonry boxes are used for mounting switches, plugs, outlets and other electronic and electrical devices in masonry, brick and 4″ block walls. • Extra deep design allows for deep devices, numerous wires, switches and other electronic and electrical devices. Standard Material • Galvanized steel -
Multi – device switch boxes – 2-1/2 deep – welded
Features • 2- 1/2″ deep • Welded • Available with 1/2″ & 3/4″ concentric KO’s with FL bracket • Available in 3 thru 5 gang Applications • Use when more than two devices or outlets are required in one box • Multi-gang switch boxes can be installed in walls or ceilings for lighting fixtures, switches, receptacles or other outlet devices • Use to bring power to a number of electrical devices where multiple conductor runs are split in two or more directions Standard Ma... -
Concerete rings and covers
Features • Available with 1/2″ and 3/4″ KO • Available in multiple depths • Mounting tabs allow for quick and easy installation • Sealed KOs prevent wet concrete and water from entering the box Applications • Octagon concrete boxes with 1/2″ & 3/4″ side knockouts are used in poured concrete construction. • Install on wooden or steel concrete forms, once the forms are removed the boxes and conduit are buried in concrete and the end is open to the room wall or ceilin...
