-
Grounding busbars
1.Material: Copper 2.Application：Grounding busbars are insulated ground bus mounting plates specifically designed for commercial applications. 3.Advantages：Available in many size and different hole pattern and brackets, made of high conductivity copper and tin-plated to inhibit corrosion, pre-assembled with brackets and insulators attached for quick installation. 4.Field Names: Busbars,Grounding Busbars -
4 Octagon box – 2-18 deep – drawn
Features • Boxes – Drawn • Boxes – 2-1/8″ deep • Boxes – 22.8 cubic inch extra cubic capacity • Available in multiple KO sizes, with or without concentric KOs and raised ground emboss with installed 10/32 ground screw where noted Applications • 4″ octagon junction boxes are used to install ceiling and wall lighting fixtures, fans or convenience outlets and devices • Octagon boxes are used to bring power to an electrical device where multiple conductor runs are split in two or more... -
4 Square box- 1-14 deep – drawn
Features • Drawn • 1-1/4″ deep • Available in multiple KO sizes with raised ground emboss with installed 10/32 ground screw and pigtail where noted Applications • 4″ square drawn junction boxes can be installed in walls or ceilings for lighting fixtures, switches, receptacles or other outlet devices. • Square boxes are used to bring power to a number of electrical devices where multiple conductor runs are split in two or more directions Standard Material • Galvanized stee -
Gauge stranded wire
1. Application: These box grounding accessories aid in safe electrical grounding path to help prevent any electrical shock. Grounding screws thread into boxes and provide a means of fastening the ground conductors. Grounding wires fasten into the boxes and are then connected to wiring systems or devices. Grounding clips provide an easy method of fastening grounding conductors to the edges of steel outlet boxes. 2. Advantages：Box grounding accessories save time by preventing the installer ... -
4 Square box – 1-12 deep – drawn
Features • Drawn • 1-1/2″ deep • Available in multiple KO sizes with raised ground emboss with installed 10/32 ground screw and pigtail where noted Applications • 4″ square drawn junction boxes can be installed in walls or ceilings for lighting fixtures, switches, receptacles or other outlet devices. • Square boxes are used to bring power to a number of electrical devices where multiple conductor runs are split in two or more directions Standard Material • Galvanized stee -
4 Square combination – device and tile covers – single device
Features • Ideal for exposed work applications, providing an easy method for the installation of electrical devices • Can be used on any 4″ square box Applications • 4″ single gang device rings are used with 4″ square boxes to mount switches, receptacles and devices • Angled slots on the covers compensate for up to 12° of box misalignment on upright framing members • C7515 flat surface is keyed to catch plaster or drywall mud • 4″ square blank flat covers are used to c... -
4 Square extension – 1-12 deep – drawn
Features • 1-1/2″ deep • 21 cubic inches • Add to junction boxes for additional wiring capacity Applications • Increases wiring capacity • Provides access for additional conduit runs and electrical wire Standard Material • Galvanized steel -
Green grounding pig tails
1. Application: These box grounding accessories aid in safe electrical grounding path to help prevent any electrical shock. Grounding screws thread into boxes and provide a means of fastening the ground conductors. Grounding wires fasten into the boxes and are then connected to wiring systems or devices. Grounding clips provide an easy method of fastening grounding conductors to the edges of steel outlet boxes. 2. Advantages：Box grounding accessories save time by preventing the installer ... -
4 Square combination – device and tile covers – two device
Features • Ideal for exposed work applications, providing an easy method for the installation of electrical devices • Can be used on any 4″ square box Applications • 4″ double gang device rings are used with 4″ square boxes to mount switches, receptacles and devices • Angled slots on the covers compensate for up to 12° of box misalignment on upright framing members • Four slots for mounting vertically or horizontally Standard Material • Galvanized steel -
4 Square boxes – 1-12 deep – welded
Features • Welded • 1-1/2″ deep • Available in multiple KO sizes, MC clamps and eccentric KOs and pigtail where noted Applications • 4″ square welded junction boxes can be installed in walls or ceilings for lighting fixtures, switches, receptacles or other outlet devices • Square boxes are used to bring power to a number of electrical devices where multiple conductor runs are split in two or more directions Standard Material • Galvanized steel -
4 Square surface covers – raised 1/2
Features • Includes hardware for mounting receptacles • Available in various cover designs • Crushed corners • Raised 5/8″ • 6.6 cubic inch Applications • 4″ square industrial surface covers allow for a quick installation of electrical devices to steel covers before they are mounted to the box • Raised 5/8″ to protect wires inside the box for switches, receptacles, and outlets Standard Material • Galvanized steel -
4 Square box – 2-18 deep – welded
Features • Welded • 2-1/8″ deep offer extra cubic capacity • Available in multiple eccentric & concentric KO sizes with MC clamps, raised ground emboss with 10/32 ground screw and pigtail where noted Applications • 4″ square welded junction boxes can be installed in walls or ceilings for lighting fixtures, switches, receptacles or other outlet devices • Square boxes are used to bring power to a number of electrical devices where multiple conductor runs are split in two or more...
